| 164 | {{{ |
| 165 | njw@t60enklavE:/etc/apt/sources.list.d$ rtl_433 -d hackrf=224893 -f 900000 -v |
| 166 | rtl_433 version 23.11 (2023-11-28) inputs file rtl_tcp RTL-SDR SoapySDR |
| 167 | [Protocols] Registered 216 out of 250 device decoding protocols [ 1-4 8 10-12 15-17 19-23 25-26 29-36 38-60 63 67-71 73-100 102-105 108-116 119-121 124-128 130-149 151-161 163-168 170-175 177-197 199 201-215 217-232 234-241 243-244 246-247 249-250 ] |
| 168 | [Input] The internals of input handling changed, read about and report problems on PR #1978 |
| 169 | [INFO] [UHD] linux; GNU C++ version 13.2.0; Boost_108300; UHD_4.6.0.0+ds1-5.1ubuntu0.24.04.1 |
| 170 | Using device Audio: device_id=0 origin=https://github.com/pothosware/SoapyAudio |
| 171 | Found 1 antenna(s): RX |
| 172 | Found 0 gain(s): |
| 173 | Found 1 frequencies: RF |
| 174 | Found 1 frequency range(s): 0 - 6000000000 (step 0) |
| 175 | Found 8 sample rate range(s): 8000 16000 22050 32000 44100 48000 96000 192000 |
| 176 | Found 0 bandwidth range(s): |
| 177 | Found current bandwidth 0 |
| 178 | Found 3 stream format(s): CS8 CS16 CF32 |
| 179 | Found native stream format: CS16 (full scale: 65536.0) |
| 180 | [SDR] Sample rate set to 250000 S/s. |
| 181 | [Input] Bit detection level set to 0.0 (Auto). |
| 182 | [SDR] Tuner set to automatic gain. |
| 183 | [SDR] Tuner gain set to Auto. |
| 184 | [Input] Reading samples in async mode... |
| 185 | [SDR] Tuned to 900.000kHz. |
| 186 | RtAudio pulse: _NOT_ running realtime scheduling |
| 187 | [Baseband] low pass filter for 250000 Hz at cutoff 25000 Hz, 40.0 us |
| 188 | |
| 189 | }}} |
| 190 | |