Changeset d15de88 for cncfraese/config

Timestamp:

05/27/2015 08:47:55 PM (10 years ago)

Author:

Norbert Wigbels <njw@…>

Branches:

master

Children:

df92c80

Parents:

b3af1d0

Message:

Spindelsteigung korrigiert fuer x und y

File:

• cncfraese/config/3040t.stepconf (modified) (4 diffs)

cncfraese/config/3040t.stepconf

@@ -22 +22 @@
   <property name="digitsin" type="float" value="15.0"/>
   <property name="digitsout" type="float" value="15.0"/>
-  <property name="dirhold" type="float" value="20000.0"/>
-  <property name="dirsetup" type="float" value="20000.0"/>
+  <property name="dirhold" type="float" value="3000.0"/>
+  <property name="dirsetup" type="float" value="3000.0"/>
   <property name="drivertype" type="string" value="other"/>
   <property name="floatsin" type="float" value="10.0"/>
@@ -141 +141 @@
   <property name="spindlespeed1" type="int" value="100"/>
   <property name="spindlespeed2" type="int" value="800"/>
-  <property name="stepspace" type="float" value="5000.0"/>
-  <property name="steptime" type="float" value="5000.0"/>
+  <property name="stepspace" type="float" value="10000.0"/>
+  <property name="steptime" type="float" value="10000.0"/>
   <property name="tempexists" type="int" value="0"/>
   <property name="units" type="int" value="1"/>
@@ -150 +150 @@
   <property name="xhomevel" type="float" value="-5.0"/>
   <property name="xlatchdir" type="int" value="0"/>
-  <property name="xleadscrew" type="float" value="4.0"/>
+  <property name="xleadscrew" type="float" value="3.96"/>
   <property name="xmaxacc" type="float" value="200.0"/>
   <property name="xmaxlim" type="float" value="279.0"/>
-  <property name="xmaxvel" type="float" value="38.0"/>
+  <property name="xmaxvel" type="float" value="33.3333333333"/>
   <property name="xmicrostep" type="float" value="8.0"/>
   <property name="xminlim" type="float" value="-5.0"/>
   <property name="xpulleyden" type="float" value="1.0"/>
   <property name="xpulleynum" type="float" value="1.0"/>
-  <property name="xscale" type="float" value="400.0"/>
+  <property name="xscale" type="float" value="404.04040404"/>
   <property name="xsteprev" type="float" value="200.0"/>
   <property name="yhomepos" type="float" value="0.0"/>
@@ -164 +164 @@
   <property name="yhomevel" type="float" value="-5.0"/>
   <property name="ylatchdir" type="int" value="0"/>
-  <property name="yleadscrew" type="float" value="4.0"/>
+  <property name="yleadscrew" type="float" value="3.966"/>
   <property name="ymaxacc" type="float" value="200.0"/>
   <property name="ymaxlim" type="float" value="385.0"/>
-  <property name="ymaxvel" type="float" value="38.0"/>
+  <property name="ymaxvel" type="float" value="33.3333333333"/>
   <property name="ymicrostep" type="float" value="8.0"/>
   <property name="yminlim" type="float" value="-5.0"/>
   <property name="ypulleyden" type="float" value="1.0"/>
   <property name="ypulleynum" type="float" value="1.0"/>
-  <property name="yscale" type="float" value="400.0"/>
+  <property name="yscale" type="float" value="403.429147756"/>
   <property name="ysteprev" type="float" value="200.0"/>
   <property name="zhomepos" type="float" value="0.0"/>